Baopin International Precision Instruments Co.,Ltd
Model No.: BP-8164
Packaging: Plywood case
Place of Origin: China
The melt flow rate tester is used for fusion viscosity lower thermoplasticity plastic quality control, the test method is under prescribe temperature, load and piston in the cylinder and so on condition, use time test method measure fusion plastic through prescribe length and diameter hole speed, to evaluate the uniformity of the polymer flow rate.
The MFR testing machine is defined as the mass or volume of the thermoplastic melts at a given temperature and load, and the melt passes through the standard die every 10 minutes. This instrument can only be used for the determination of the melt flow rate (MFR) of the mass method, which can be used to characterize the viscous flow characteristics of thermoplastics in the molten state.
ASTM-D1238: Standard test method for thermoplastic melt flow rate.
ISO-1133: Determination of thermoplastic melt mass flow rate (MFR) and melt volume flow rate (MVR).
GB/T3682: Thermoplastics melt mass flow rate and melt volume flow rate measurement.
Temperatrue control scope 100 ~ 450 ℃ Temperatrue control precision
Temperatrue recovery time
Timing accuracy 0.01 s Cylinder Φ9.5504±0.0076mm
1. Measuring method: Quality method/volume method
2 .Measure scope: 1.0~100g/10min,0.01~350cm3/10min
3. Weight: 1000g,2160g,3800g,7160g,10000g,12500g,21600g(equipped with one of them)
4. Display method: PID control liquid crystal display (LCD)
Product Categories : Melt Flow Rate Tester