Baopin International Precision Instruments Co.,Ltd
Model No.: BP-8172-B
RAW MATERIAL: Plastic, Rubber
Color: Yellow And White
Packaging: Plywood case
Place of Origin: China
This PLC control small lab internal mixer is equipped with PLC programmable system with human-machine interface operating system. Temperature, time and torque can display instantly. The mixing process will be completed automatically, simple and applicable with energy efficiency.
PLC lab internal mixing machine can be used for testing of raw materials, thermal and shear stability testing of polymer, etc.
|Mixing chamber volume||0.2L/0.5 ( optional )|
|Rotor speed ratio||2 : 3|
|Temperature range||RT ~ 350 ℃|
|Air source pressure|| |
0.5 ~ 0.8 Mpa
|Main motor||3 KW|
|Power supply||3 ∮, 5 lines|
1. Refuel method: Feeding directly
2. Rotor speed: 0 – 90 rpm
3. Rotor type: Roller / Banbury ( optional )
4. Heating method: Electro-thermal tube
5. Controller: PLC programmable color touch screen has human-machine interface. All the operating parameter can be set and controlled at will. Mould pressuring process and vulcanization curve can be displayed dynamically.
■ Three sides of the mixing chamber are independent with mezzanine heating or connecting water-cooling tubes, meeting the process requirements of any milling and refined plastics.
■ The surfaces of the mixing chamber contacted with the material are adopting high corrosion resistance and high wear-resistant material. With the processing of high frequency, carburization, hardening and tempering, chrome plating and polishing, it becomes hard and durable, hard to wear.
■ Strong pneumatic arc pressure mound is matched with the end of mixing chamber. This chamber is of good sealing property, without glue leakage and the mixing can be close to the real working environment.
■ The speed motor drive of high pulling torque has an oval mixer shaft with two wings convex edges of lead angle. The angles are dislocated with opposite strength rotating and shearing, excellent mixing effect and efficient performance, significantly shortening the plasticate cycle.
■ The human-machine interface operating system of PLC programmable can set and instantly display all the process parameters. The mixing time, mixing temperature, rotor speed and load torque can also be set at will or display instantly, realizing the on-line measurement of mixing performance.
Product Categories : Lab Internal Mixer Series